Insulated panel floor and insulation

We provide multifarious versions of insulated panel floor insulation. From simple step-proof design to a specific – load bearing insulated floor and antistatic coating is choosable. As if it is a deep-freezer or a blast freezer unit, our panels ground purpose is to reach the most optimal energy saving and guarantee the capacity and wearing quality.

  • Welded on the spot watertight PVC, anti-skid panel housing
  • Welded on the spot antistatic PVC panel housing
  • Frost-proof resin floor surface, with rounded floor corner in the heels
  • Welded on the spot food-proof PVC panel housing
  • Shape oriented elasomeric floor coating (1 mm – 6 mm), expansioned on the spot, anti-skid, watertight surface.

In case of normal coolers there is possibility to leave insulated flooring, but its increases the cost of coldrooms.

From energy saving aspect advisable to consider configuring an insulated panels. From the enumeration below you can get information about configuring coldroom panels:

hutoepito_1_hexafloor_padozat

1. Hexafloor floor

Under coating: 0,6 mm depth galvanized steel
Over coating: 0,6 mm depth galvanized steel + 12 mm laminated birch lamina, sythetic resing, Hexafloor anti-skid floor
Depth of floor: 60-200 mm, with cold bridge free connections
Insulation: 42 kg/m3 hard, two-component, FCKW free polyurethane foam

The floor panel’s splitty surface loadability 1500-2000 kg/m², or rather 150 kg/tire.

 

hutoepito_2_alu_padozat

2. ALU floor

Under coating: 0,6 mm depth galvanized steel
Over coating: 0,6 mm depth galvanized steel + 12 mm laminated birch lamina + 2,5 mm depth aluminium ribbed lamina
Depth of floor: 60-200 mm, with cold bridge free connections
Insulation: 42 kg/m3 hard, two-component, FCKW free polyurethane foam

The floor panel’s splitty surface loadability: we reommend just for handly storage!

 

hutoepito_3_rm_acel_padozat

3. RM steel floor

Under coating: 0,6 mm depth galvanized steel
Over coating: 0,6 mm depth galvanized steel + 12 mm laminated birch lamina + 2,0 mm depth anti-skid rustproof steel
Depth of floor: 60-200 mm, with cold bridge free connections
Insulation: 42 kg/m3 hard, two component, FCKW free polyurethan foam

The floor panel’s splitty surface loadability: we reommend just for handly storage!

 

hutoepito_4_erositett_hexafloor_padozat

4. Strengthened Hexafloor floor

Under coating: 0,6 mm depth galvanized steel
Over coating: 24 mm laminated birch lamina + 12 mm laminated birch lamina,
lay in knitting, impregnated with resin, Hexafloor anti-skid surface,
Foamed stiffener into insulation – with spreader mountings
Depth of floor: 60-200 mm, with cold bridge free connections
Insulation: 42 kg/m3 hard, two component, FCKW free polyurethan foam

The floor panel’s splitty surface loadability 3000 kg/m², or rather 200 kg/tire.

 

hutoepito_5_beton_alatti_teherviselo_padozatszigeteles

5. Under concrete load-bearing floor insulation

Under footwall: ferroconcrete or fiber reinforced concrete (according to statics)
Foiling: Waterproof insulation sheet (V50 S4 AL 1 mm,or tantamount)
sticked on all surface, (at the wall pull on to the building’s wall upper verge)
Underfloor heating, bedding to underfloor heating concrete
(2 or 3 circled design, with 10 W/m heating cables, controlled by damper thermostat
Warm insulation: 2*100 mm big substanced closed foamed PIR/XPS extruded joint, with offset joints
PE foil with separator stratum
Upper footwall: 12 cm fiber reinforced concrete or reticulated concrete, according to statics

The floor panel’s splitty surface loadability 1500-2000 kg/m², or rather 150 kg/tire

 

Extra surface constructions, coating to coldroom floor panels

Welded on the spot PVC waterproof, anti-skid floor coating
Welded on the spot PVC antistatic floor coating
Antifreeze resin floor surface, with rounded floor corner in the heels
Welded on the spot food-proof PVC floor coating
Elasomeric polyurethan floor coating according to shapes (1 mm – 6 mm), foamed on the spot, anti-skid, with wear-proof surface.

Even more energy and cost efficient solutions!

Interested in having a solution of energy efficiency in your facility? Request for a free quotation!

From Monday to Friday between 8am to 4pm we await your call in the following number:
+36 37 / 737-500

You can reach us throughout the day via e-mail: info@coldroombuilder.com
Or you can ask us online for a tailored offer:

Ask for a free quotation!

Should you have any questions, please contact our experts!

Coldroombuilder's professional engineers are ready to provide you with comprehensive technological support and advice. We are available every weekday on the following number:
+36 30 / 459-7493

Should you have any question or notes, please send us an enquiry. We will get back to you within 48 hours.

Send us an enquiry